.png "Powered by vBulletin")
82 1100e head gasket
O.K. Here is a dumb question! Its been so long since I`ve done this that I cant remember! Can you remove the head off a 82 1100e with the motor in the frame, so that the head gasket can replaced??? I`ve got 30,000 plus miles on mine and she`s starting to leak pretty bad!
-
sigpicIt wasnt me! I didnt do it! You cant prove anything!
82 1100EZ
-
Yes. It's a good idea to change the base gasket at the same time...and valve stem seals...and many people hone and throw in new rings too.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
Thanks!!! Thats what I`ll do!
GregsigpicIt wasnt me! I didnt do it! You cant prove anything!
82 1100EZComment
-
Before you tear it apart to replace gaskets that might NOT be leaking, try changing the orings on the front 2, center, head nuts first. I have found this to be the problem MANY times. Ray.Comment
-
+1 on RapidRay's advice. I followed his advice after I thought I had a base gasket leak on my 83 1100. No more leaks and it's quick and simple, which is even better!
JohnComment
Comment