Odd that its the same bore size as an 1100. I havent done one of these before, so maybe this is normal for the GS850. Just not used to this on my other builds.
Announcement
Collapse
No announcement yet.
Any reason why my gs850 headgasket
Collapse
X
-
mlinder
Any reason why my gs850 headgasket
Has a 72mm bore instead of 69mm?
Odd that its the same bore size as an 1100. I havent done one of these before, so maybe this is normal for the GS850. Just not used to this on my other builds.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35520
- Torrance, CA
The 850 and 1000 share the same head gasket. Maybe the 1100 does too?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
mlinder
7981gs, what was the result with that? Makes no sense to me, and the oem gasket was certainly 69mm, but....
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35520
- Torrance, CA
Originally posted by 7981GS View PostNone of them share the same head gasket.
Could you use a 1000 head gasket on a 850? Yes. BTDT.
DanielEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35520
- Torrance, CA
Originally posted by mlinder View PostWhere are they listed as the same part number?
Every parts fishe on the planet that used REAL Suzuki part numbers.
GS850
Part# 11141-49410
supersedes: 11141-49002 11141-49003 11141-49004 11141-49004-H17
Desc GASKET,CYLINDER
GS1000
Part# 11141-49410
supersedes: 11141-49002 11141-49003 11141-49004 11141-49004-H17Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
mlinder
No need for the sarcasm. I don't have the parts fiche here. Was asking because I didn't know, not because I doubted you.
Comment
-
7981GS
Originally posted by Nessism View PostOkay Daniel, then please tell me why both the 850 and 1000 have the same head gasket part number?
Do I HAVE to take pictures of the 3 different gaskets for you to be a believer?
I CAN.
Daniel
Comment
-
7981GS
Originally posted by mlinder View Post7981gs, what was the result with that? Makes no sense to me, and the oem gasket was certainly 69mm, but....
Until carbon builds up in the extended quench area.
Daniel
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter- Jul 2005
- 15149
- Marysville, Michigan
Daniel, what's different between the 850 and 1000 gaskets? I know Suzuki played around with different methods of sealing the cylinder stud areas. I'll have a look at the NOS Suzuki gaskets I have when I get home.
Comment
-
7981GS
Comment