Announcement
Collapse
No announcement yet.
Valve thickness gauge question
Collapse
X
-
MoMakkawi
Valve thickness gauge question
Ive been searching all over the auto parts stores and internet to find the proper thickness gauges to do measure the gaps for a 1978 gs 750 but cant seem to find the right thickness gauge to use the book says .03-.08 mm but at most places like autozone or pepboys i havent found them that thin anyone know where to find the best thickness gauge to use to do the job.Tags: None
-
bbjumper
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35516
- Torrance, CA
I use regular old english unit feeler gauges. .0015" - .003". If the .0015" doesn't pass I go down a shim size. I have not found it necessary to chase down a metric feeler gauge set.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
mike_of_bbg
-
Originally posted by Nessism View PostI use regular old english unit feeler gauges. .0015" - .003". If the .0015" doesn't pass I go down a shim size. I have not found it necessary to chase down a metric feeler gauge set.
I am not saying that a metric set is not worth it, just haven't sprung for one yet.
By the way, the spreadsheet that I offer in my sig doesn't care whether you use inch or metric measurements.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
DPage
Try Pep Boys again, I got a metric set from them that goes down to .04 MM (which is thin enough) for about $5.
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17427
- Indianapolis
Originally posted by DPage View PostTry Pep Boys again, I got a metric set from them that goes down to .04 MM (which is thin enough) for about $5.
Any decent non-Harley powersports shoppe will have a black Bikemaster tool display which contains a nice metric feeler gauge set that starts at .03mm for about $10.
If your clearance is .04 or less, the shim gets changed no matter what -- you don't NEED the .03 blade. Besides, .03mm is really thin and flimsy.
Tappy valves are happy valves...1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
Comment