Announcement
Collapse
No announcement yet.
Glue for Handlebar Grips?... suggestions.
Collapse
X
-
Grimmage
Glue for Handlebar Grips?... suggestions.
The handlebar grips on my GS keep slipping off. Annoying. Can anyone suggest some good glue to use on the inside of the grips? Much appreicated. Thanks.Tags: None
-
I always use hairspray. A can of Aquanet Extra Super Hold will cost a buck or two and last a lifetime. First clean the bars and throttle assembly thoroughly. Then just spray it into the grip and immediately slide it on. It may take a day or so to dry and it is important not to move the grips around while it is drying.
JoeIBA# 24077
'15 BMW R1200GS Adventure
'07 Triumph Tiger 1050 ABS
'08 Yamaha WR250R
"Krusty's inner circle is a completely unorganized group of grumpy individuals uninterested in niceties like factual information. Our main purpose, in an unorganized fashion, is to do little more than engage in anecdotal stories and idle chit-chat while providing little or no actual useful information. And, of course, ride a lot and have tons of fun.....in a Krusty manner."
-
Zooks
Do not use hairspray (IMHO). Hairspray is water soluble and if water ever gets in there (like when it rains) the grip will slide off like it's been lubricated with olive oil. If you are doing 100km/hr at the time this could be very scary. I have actually heard, first hand, of this happening with disastrous results.
Use 'contact grip'. Smear it on the bar and slide the grip on really quick. Wait an hour or two without moving the grip and you should be good to go.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35619
- Torrance, CA
I use double sided tape, the type commonly used to hold on golf grips. A little mineral spirits inside the grip and on the tape allows the grip to slide on easily.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Forum GuruCharter Member
GSResource Superstar
Past Site Supporter- Oct 2002
- 8858
- Angeles Forest, So.Calif./Red rocks of Southern Utah.
Hair spray is to help the grips slip on easier.
I also use two sided tape, though I call it friction tape. It's just a little sticky on both sides and is fabric based. Just a few layers should do it. Wrapping it in the same direction you plan to twist the grips on is best. Apply hairspray liberally to help the grips slip on. The tape will adhere to the grips well, if you layered right.And on the seventh day,after resting from all that he had done,God went for a ride on his GS!
Upon seeing that it was good, he went out again on his ZX14! But just a little bit faster!
Comment
-
spyug
The folks will likely say the same as hair spray in the wet but i recommend common dish water detergent. A tiny bit in the grip acts as a lube when you push it on and in a few hours it dries to a glue like grip.
I try not to ride in the rain so I don't know if it is a problem hen or not.
I've used it on three bikes now and no problems.
Just my experience.
cheers all,
Spyug.
Comment
-
Mark M
Originally posted by Zooks View PostDo not use hairspray (IMHO). Hairspray is water soluble and if water ever gets in there (like when it rains) the grip will slide off like it's been lubricated with olive oil.
One caveat - I tried hair spray with the Renthal kevlar compound grips on my MX bike and it WOULD NOT cure. Period. I left it for a couple of days and could still slide the left grip off... Ended up safety wiring those on. First time in a fair number of grips that hairspray failed.YMMV
Mark
Comment
-
Originally posted by Zooks View PostDo not use hairspray (IMHO). Hairspray is water soluble and if water ever gets in there (like when it rains) the grip will slide off like it's been lubricated with olive oil. If you are doing 100km/hr at the time this could be very scary. I have actually heard, first hand, of this happening with disastrous results.
Use 'contact grip'. Smear it on the bar and slide the grip on really quick. Wait an hour or two without moving the grip and you should be good to go.
Thanks,
JoeIBA# 24077
'15 BMW R1200GS Adventure
'07 Triumph Tiger 1050 ABS
'08 Yamaha WR250R
"Krusty's inner circle is a completely unorganized group of grumpy individuals uninterested in niceties like factual information. Our main purpose, in an unorganized fashion, is to do little more than engage in anecdotal stories and idle chit-chat while providing little or no actual useful information. And, of course, ride a lot and have tons of fun.....in a Krusty manner."
Comment
-
jdmae92
-
pickardracing
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13969
- London, UK to Redondo Beach, California
I used the glue from a bicycle puncture repair kit.
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter
Super Site Supporter- Oct 2003
- 17441
- Indianapolis
Hair spray -- the cheaper the better. (The expensive stuff seems to have more conditioners and junk in it that makes it less suitable as glue.) Dry with a shot of compressed air, don't touch it for a few minutes, and you're done.
I've also never had a problem with grips loosening in wet weather, but then again I don't know everything.1983 GS850G, Cosmos Blue.
2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
2015 Yamaha FJ-09, Magma Red Power Corrupts...
Eat more venison.
Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.
Celeriter equita, converteque saepe.
SUPPORT THIS SITE! DONATE TODAY!
Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter- Oct 2006
- 13969
- London, UK to Redondo Beach, California
Brian,
I like that one, it's also good for taking them off if you can get it under there.... Once saw a guy lose both grips on a downhill run on mountain bikes with grips fitted that way though. It's not common but not pretty when it happens.
First time I put mine on the GS dry, just used water as a lubricant, worked fine once dry. 2nd time (re-used them on my new bars) they were a bit sloppy so I used the rubber cement.
How are those british tyres doing??
Dan1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/
Comment
-
DanTheMan
I just installed a new set of heated grips (from Aerostich) on mine, and the instructions said to use slow curing epoxy. Worked great......my original left handgrip kept pulling off in hot weather, now it stays put, no problem.:-D:-D
Comment
Comment