Handlebar Turn Signals

[Tracer]

I am interested in mounting turn signals on my handlebars, specifically the type that hang down from the bars just ahead of the clutch and the front brake levers. I have tried searching online but can't seem to find anything other than bar end turn signals.

Thanks in advance.

[kingofvenus]

Mid '70s Kaw 900/1000 LTD's had them like that, if my memory serves me right....

[J_C]

I saw a harley pull out of the local dealership today and noticed that it had them, so theyre definitely out there; just make take a bit of searching

[bwringer]

Skrillions and jillions of Hardley-Ablesons use these.

All you need is a 1/16 inch thick piece of aluminum to make a shim and the HD world's your oyster. (HD bars are 1 inch thick, Suzuki bars are 7/8 inch.)

[Tracer]

I did spend some time last night looking at/for HD front turn signals, but didn't see anything in terms of mounts. I found a few on EBAY that appear to mount right onto the clutch and brake housings. I'll keep looing for others that might mount right onto the bars.

The Kawi leads look good too.

Thanks for the input everyone.