Announcement

Collapse
No announcement yet.

82 GS1100E 36mm Mikuni Flat slide jetting issue

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    82 GS1100E 36mm Mikuni Flat slide jetting issue

    I have a 1982 Suzuki GS 1100E
    I’ve had these old Mackie 36 mm flat Slides lying around and wanted to put them on the bike. I’m trying to decide what main jetting to start with.
    Right now there are 127 main jets which I believe are too small. Has anybody gone through this before?
    I would appreciate some advice on a starting point
    You do not have permission to view this gallery.
    This gallery has 1 photos.

    #2
    Mine came set up for GS1100 with 130's and 17.5 pilot jets. I dropped to (edit) 125 because that was the next size that I had and lowered the needles to put the clip in the second from the top groove. I have been using an air/fuel meter but am unconvinced of its former rich readings. I would try it. I'm going back richer, I just found the fourth 127.5 so I'll use them next.
    Last edited by Don R; 10-07-2024, 12:02 AM.

    Comment

    Working...
    X