Announcement

Collapse
No announcement yet.

1977 gs750B jets

Collapse
X
Collapse
 
  • Page of 8
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 5 6 7 8 template Next
    #106
    why not run em? its just eliminating one screw and making the other (fuel) serve both functions, might be a sight easier to dial in, what with less variables and fuel screws you can get at. just stick the 100 mains and 15 pilots in, and see what happens. or are you doing a resto?

    Comment

      #107
      So I tried running the carbs last night. It did run better than it did before I took them off to rebuild. Anyway, I don't think they are going to work out. It had a hanging idle for about 15 seconds and then would tank. I tried to ride it for a short distance and i wasn't going anywhere fast. I was getting a little bit of white smoke out of the exhaust.

      Comment

        #108
        Whitish / blueish smoke is oil smoke..have you done a compression check on each cylinder? Whats the mileage. Had the bike been sitting for a long time before you got it?
        Last edited by chuck hahn; 03-27-2011, 12:25 PM.
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment

          #109
          call me i got nuttin to do.
          MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
          1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

          NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


          I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

          Comment

            #110
            And the question remains... what number is on the needles?
            De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

            http://www.thegsresources.com/_forum...35#post1625535

            Comment

              #111
              Update: So I recieved the correct VM26SS carbs this past Saturday and have just about finished the cleaning process. Two are done and the other two are coming out of the dip now so I am trying to get this thing running tonight. I will update again when i get it running.

              Comment

              Previous 1 5 6 7 8 template Next
              Working...
              X