.png "Powered by vBulletin")
My friend has a 81 1000gl and the #4 carb is missing the aluminum that is covered by the gasket....anyone have an extra?
-
-
I'm lost. What plug are you looking for? A Pic ?
-
It's the plug that one side is in the throat of the carb and the other on the gasket surface of the bowl gasket. Some use o-rings under the float gasket.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Let me see if I can accommodate your request.
Pm me with your ship to address.Comment
-
Dale knowsOriginally posted by rustybronco View PostLet me see if I can accommodate your request.
Pm me with your ship to address.
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
I have one if rustybronco does notComment
-
Awesome! Thanks guys. PM sent to rustybronco. I'll let you know Street Fighter if he doesn't. Thanks resource gods!Comment
-
These plugs are weird. They either just fall out or you need to cut the carb body to get them out.1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
Naa... you put an allen wrench on them, give it a good pry with a large screw driver and they'll pop right out. At least the one I removed last night did anyways.
Chucksuki, your plug is in my pocket to be dropped in the mail on my way home tonight.Comment
-
Thanks Rusty!Comment
Comment