Exhaust for 84 GS1100GK

[Guest]

I was wondering if there was any way that this system would fit on my GK...

http://www.ebay.com/itm/370946392419?item=370946392419&viewitem=&vxp=mtr

The head pipes on it currently to rusted to just shine up.
Was gonna blast and use the high temp silicone base powder coat, but the PO had someone tig (what I can only figure was small holes) on the right muffler so those spots would definitely show through.
Any suggestions are greatly appreciated.

[GSX1000E]

Those will work with some slight modifications to the rear mounts. Look like L model mufflers to me or off of an 1100E (4-valve) perhaps?

[rustybronco]

More than likely those will be a little shorter the the factory exhaust was. I'd be a little cautious of the heat melting the luggage.

[Mayhem63]

Just took the rest of the bodywork off to do a thorough degrease before I replace the valve cover gasket and the stuff on the muffler looks like JB weld and I know that doesn't hold up to the cookout and cure cycle of the powder...