gs1000 standard exhaust fitting

[Guest]

Hi, please excuse my ignorance but I have always had after market pipes on my gs,however I have a full standard set from a gs1000e/s circa 1980 for sale but I have been asked about the 2 middle down pipe flanges,
mine don't have any, just the 2 outer pipes have them.
could some one please tell me what is needed to fit these. are they split flanges I have to get ? otherwise how do they get on there. cheers.

[Nessism]

Check the parts fishe to get a handle on what parts are needed. http://www.alpha-sports.com/suzuki_parts.htm Basically, you need two flanges, and 4 split-collar pieces.

[rustybronco]

The innermost pipes are welded to the mufflers. The outermost are separate.

http://www.alpha-sports.com/spst/1980%20GS1000E/31.gif

http://s32.photobucket.com/user/rustybronco/media/IMG_2536.jpg.html

It sound like the system you have is not a 'E' model. Possibly yours is for a gs1000G?

[intruder]

Thanks for that info.I do indeed need 4 collars and 2 inner clamps.
are these readily available or is it wait for an ebay item?
also does any one know if this exhaust is good for the g model or is it just e or s it will fit.

many thanks for any info.

[intruder]

the pipes I have look just like the ones in the photo you have on the link . yjanks

[rustybronco]

I mis-understood what you were asking. Follow Nessism's remarks.

[JTGS850GL]

Are the two outer pips welded to the mufflers or are the two inner pipes welded to the mufflers? It it's the former then you have a GS1000G exhaust. If it's the latter then you have the 1000E exhaust. Either way you will need 2 of the #4 "Clamps" and 4 of the #7 "Plates" along with the 2 of the #8 gaskets and a #9 and #10 clamp. to fully assemble the exhaust system. You may want to pick up 4 new #3 exhaust gaskets as well.

[Big T]

You guys forgot the L pipes

[chuck hahn]

2 collars and 4 half moons.