Turn Signal's (on guage) flashing at 5-7k Rpm !

[GabrielGoes]

today i noticed after getting my carbs finally right that riding around that when the engine hits around 5-7k RPM the turn signal lights on the gauges (not the actual turn signals) both flash at the same time and flicker like crazy when i hit 7k rpm it does NOT flicker below 5k RPM... the rest of the lights do not flicker or anything at any rpm... this is worrying me because i know somethings gonna blow sooner or later!! i DID go through a big puddle of a few days ago i dont know if this is related or not but everything else works fine.. any ideas? thanks any help/pointers is appreciated

[friedshrooms]

you could go through the headlight bucket and check the connections maybe let them sit in the sun for a bit?

[JEEPRUSTY]

It seems like a switch problem.
That is one place where the left and right wires meet.

If its a short brought on my vibration then it maes sense that you indicators flash but the lights do not illuminate.

I would think the flasher does not get a long enough or large enough jolt to trip.