Announcement

Collapse
No announcement yet.

Issue with LED turn signals

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Issue with LED turn signals

    I have added 1 watt turn signals to the rear of my bike, no problem. As soon as I try and add the ones to the front, they don't work in the front or back. Any ideas on whats going on? If i put the originals back on, it works even with the rear LEDS on!

    #2
    Rather simple situation here. The flasher unit is a thermal unit, that is, it needs to see a specific current load going through it to heat it up to start the flashing.
    Evidently one set of LEDs still lets it draw enough current, but two sets don't.

    First clue: the stock signals draw between 46 and 56 watts per side, you are only drawing TWO.

    .
    sigpic
    mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
    hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
    #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
    #2 son: 1980 GS1000G
    Family Portrait
    Siblings and Spouses
    Mom's first ride
    Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
    (Click on my username in the upper-left corner for e-mail info.)

    Comment

    Working...
    X