Announcement

Collapse
No announcement yet.

83 gs 450 owners manual

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    83 gs 450 owners manual

    Is this online anywhere? did I overlook it at basscliff? Why does my 83 450 have no bright light switch? the list goes on and on. Any help appreciated.

    #2
    The Clymer and Haynes on BassCliff's site should cover most things.

    Also, check eBay seller eClassic Bike and he may have a reproduction factory one for your bike, his prices are good.
    1982 GS450E - The Wee Beastie
    1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

    sigpic

    450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

    Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

    Comment


      #3
      I have the clyner. Just can
      t figure out why this bike has no switch for brights on the bars. First bike i've seen like this. Does this bike not have brights?

      Comment


        #4
        I don't know that bike in particular, but have you tried moving the turn signal selector up and down?

        That's the way it is on many of the GS bikes. Maybe the lettering is worn off the handle?

        This may not match your bike exactly, but should give you an idea what the label should look like.
        Your bike will not have the Auto-Cancel feature, so ignore that particular word, but the rest should be good.



        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          Thanks Steve, just re-read this and I think I completely mis-read the original question!

          Yeah, indicator switch should push up for high beam...
          1982 GS450E - The Wee Beastie
          1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

          sigpic

          450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

          Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

          Comment


            #6
            Thanks Pete! That is exactly it. I must have looked at the page with a similar pick several times and just not had it register. The labeling on the housing is gone. This is my first Zook so The integrated switch didn't even popin my head.

            Gary

            Comment


              #7
              Good stuff Gary, yeah mine's worn too although I don't have it on any more, I went for a newer left switch block for other reasons and I guess it was a common problem because the high beam switch is a separate button on it.
              1982 GS450E - The Wee Beastie
              1984 GSX750S Katana 7/11 - Kit Kat - BOTM May 2020

              sigpic

              450 Refresh thread: https://www.thegsresources.com/_foru...-GS450-Refresh

              Katana 7/11 thread: http://www.thegsresources.com/_forum...84-Katana-7-11

              Comment

              Working...
              X