no power at all

[Guest]

so I hooked everything back up and I get nothing when the key is turned. its a new battery that still reads where its supposed to be. the only thing that I found that may or may not be odd is that the fuse box, which has power to the mains, but has no power at the fuses with the key in on and off positions, not really sure that it should though.

I removed the wire ties and hold downs to get wires out of the way while working on something else, but nothing was unhooked. including this just in case the act of moving something may have damaged it.

battery is 12.5+ same at the relay

so I'm working on this thing right now, you got suggestions I'll try them in real time.

[detorn]

update one, cranks strong at the solenoid, going to double check the ground now.

[detorn]

ground seems good, cleaned all of the major electrical connectors too

[rustybronco]

Without looking at a wiring diagram first, power should go from the battery to fuse box then then it goes to the ignition switch and back to the fuse box again.

Grab a volt meter or a test light and get cracking!

[detorn]

main bullet connector came undone and was hiding behind tape. we have juice.