Indicator wiring issue

[RIGGER]

Gs1000

The left hand switch gear

[RIGGER]

Gs000

The clocks with only one set of wires from the back all going in to a single plug

[RIGGER]

Gs1000

The wires left unconnected from the headlight and I feel that there are two wires missing from the clocks as suggested in this thread

[RIGGER]

GS1000 EC or EN

Hi Guys
I cannot seem to post all pics in one go so have doe a few separate but basically I believe my bike is a 1978 EC or EN and hopefully the pics of the almost complete bike on the stand will show this.
Someone suggested there should be two wires coming from the rear of the clocks which could be right as I have two wires in the loom within the headlight bowl which are not connected to anything, any suggestions, I have a wiring diagram which supports this but could do with some actual pics of the loom inside the headlight and what wires go where.

[rustybronco]

I am trying to upload some photo's of the bike in question to show it is either a GS1000 EN or EC

The rectangular box in your photo is used on the GS1000EC and EN's. EC= 1978 EN= 1979

[rustybronco]

The left hand switch gear doesn't appear to be the correct one used with self cancel turn signals.