Connecting 2 Horns

[Guest]

Utilizing the Horn Mod on BikeCliff's site (http://members.dslextreme.com/users/...stall_gert.pdf), how do I then incorporate a second horn?

Thanks,

Snackie

[78550GS]

Some relays have 4 pins, some 5. The fifth pin might be numbered #87a. This is not a problem,
simply ignore this pin. Some 5-pin relays might have a second #87 terminal. Again, not a problem,
you can ignore the extra pin or use it to run a separate wire to a second horn.

Quoted from that how-to.

[posplayr]

Horns are in parallel, blue wire goes to both horns. Both are grounded .

[snackie]

Oops, I missed that part. Thanks!

[snackie]

I have the the 5-pin relay, so just connect the 2nd horn to 87A and ground it. Thanks!

[78550GS]

You got it covered.

[posplayr]

You got it covered.

Completely ignored my post and completely mis-read yours.....

[Steve]

I have the the 5-pin relay, so just connect the 2nd horn to 87A and ground it. Thanks!

If you connect your second horn to the 87A pin, you are going to get a surprise when you turn the key ON.

.

[cowboyup3371]

You need one with two 87s

[posplayr]

You need one with two 87s

can he just use white out on the "a"..............

[snackie]

I didn't see the reponses to this thread and I did get a big surprise. So, I need a new relay with two 87 ports?

[posplayr]

I didn't see the reponses to this thread and I did get a big surprise. So, I need a new relay with two 87 ports?

No just wire the horns in parallel to the same 87 pin.

[snackie]

so, run 2 wires off of 87?

[Steve]

Yep, that will work.

.