.png "Powered by vBulletin")
Hey all. NOT a wiring guy. I got a KOSO RX-2N gauge to replace my 83 1100e gauges. It comes with a gear indicator but That wont work. I am wondering if its possible to just get the N signal out of the gear switch. Is there just a neutral switch? Has anyone done a conversion? Thanks!!
-
-
Running down the left rear side of the engine cradle, you will find a bundle that has a 6-pin connector that is usually near the top of the airbox. Alongside that cable is a single wire (usually blue). The cable has wires for all the gear positions, the blue wire is the Neutral wire.
The stock setup has power fed to all the lights in the instrument panel. The selector switch at the gear shifter will ground out one light at a time to light it. If your new setup also feeds power to the light and looks for a switched ground, just connect to the blue wire.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.) -
Thank you. Will keep you posted.Comment
Comment