Announcement

Collapse
No announcement yet.

coil ohms??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    coil ohms??

    im replacing the coils on my 81 gs850g as they are the originals and cracked, and well just junk. one of the boots was cracked so bad it was arching and as a result had a dead cylinder. i cut the boot off and installed a random connector i had laying around. it has a dynojet jet kit, pods, and a v&h 4-1 pipe. id like to compliment those with an equally superior ignition system. i was looking at dyna coils and there are different ohm coils, some 2.2, another 3.0. how do i determine the proper ohms i need? will an improper ohm coil cause damage by having too little or too much resistance? thanks

    #2
    Look in your factory Suzuki service manual for the proper coil resistance. The 3 ohm green Dyna coils are a popular aftermarket coil choice.
    Ed

    To measure is to know.

    Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

    Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

    Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

    KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

    Comment


      #3
      Primary side @ 3 Ohms will do great, as mentioned by Ed

      Dynatek DC1-1 Ignition Coils 3.0 ohms Angled Dual Output Green

      Comment

      Working...
      X