GS1000 78/79 turn signal control unit... anyone got photo of one?

[Guest]

Hi, I own a 1978 GS1000E and Im experiencing the common problem with the indicators/turn signals not working. I am told that I need to replace my "turn signal control unit" to fix this problem. Fortunately I have been offered some used units, however each of the control units I have been offered ALL look different.
I would appreciate if somebody could send me a photo of this control unit (1978-1979)... preferably in situ on the bike if possible please. This will help ensure I buy the correct item. Many thanks!

[Eli69]

there are two plugs, one has six wires, the other has four. you can see the wires coming out of the unit on the top right.

DSCF1171.jpg

[PeteHero]

Hi, thats great, thanks very much for the photo.... May I also ask, exactly where is the control unit itself and how do I access it. I cannot see it in your photo, but is it under the seat?

[Eli69]

it's the black box below and to the right of the rear brake fluid reservoir. attached to the battery box.

[rustybronco]

It looks like these.

[PeteHero]

Excellent, now I understand... Thanks for your help!

[PeteHero]

Hi Rustbronco, thanks for your input.... and might you have spare one for sale?

[azr]

Good luck finding one that works, unless it's from a trusted member on here of course. A lot of us do a fix with a couple of relays to fix this problem.

[rustybronco]

If I recall correctly, all those unit's had some sort of an issue. Flashes one side- no flash- no self cancel etc. I wish I had the time to build a test platform to see if any might be worth your trouble.

Brighton where?