Announcement

Collapse
No announcement yet.

Did I miss anything ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Did I miss anything ?

    After a very long two weeks at work I finally get to catch up with a few tasks.


    I've decided to run with the air cooled motor for a while in the Frankenstein bike and most of the following has arrived -

    Brand new -

    82 1100E loom
    "Polaris" RR
    Triumph lead
    dyna coils
    new switchgear and ignition switch
    new caltric stator

    Used I have -
    3 good igniter modules
    2 signal generators
    2 fuesboxes
    2 starter motors
    3 starter solenoids

    i plan on reading all the relevant source material , however, what did I miss (if anything)
    78 GS1000C- Now sporting 1100E suspension and numerous goodies
    82 GS750E/82 1100E/ GSXR Frankenstein bike completed
    83 1100E "rescue bike" saved from the barn
    2008 Bking - Torque Torque Torque
    Next project slowly coalescing

    #2
    Make sure you clean all the connections when installing the new loom. Verify all your grounds are good or even go to the single point ground. When installing the R/R make sure you bypass the headlamp loop and run the stator wires directly to the R/R.
    http://img633.imageshack.us/img633/811/douMvs.jpg
    1980 GS1000GT (Daily rider with a 1983 1100G engine)
    1998 Honda ST1100 (Daily long distance rider)
    1982 GS850GLZ (Daily rider when the weather is crap)

    Darn, with so many daily riders it's hard to decide which one to jump on next.;)

    JTGS850GL aka Julius

    GS Resource Greetings

    Comment

    Working...
    X