Announcement
Collapse
No announcement yet.
Flywheel Puller
Collapse
X
-
Flywheel Puller
Hi. This question has probably been answered somewhere on this site, so my apologies in advance. I have 1979 Suzuki GS1000 chain drive bike. My starter clutch is in need of replacement. I have removed the flywheel bolt but need a flywheel puller . It looks like the bolt that came out of the flywheel is a 16mm bolt. Can I use a longer 16mm bolt, screwed into the existing hole to remove the flywheel? Or do I need a 35 or 38 mm puller for the larger threaded portion of the flywheel? or can either way work to remove the flywheel?Last edited by Guest; 04-17-2019, 10:08 AM.Tags: None
-
Def
Yes, GS1000...changed it in my post, thanks tom203. That's exactly what I needed to know. You don't happen to know the size of the threaded hub? 35mm, 38mm, 40mm?
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35622
- Torrance, CA
You can remove the rotor/flywheel using a long bolt. The swingarm bolt for example. If you search ebay for "GS1000 flywheel" and you will find lots of different puller options.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
I just did this and bought the tool. All you need is the cheap tool that is essentially a bolt.
See Ebay Amazon etc.
An impact driver helps.1982 Katana 1100, 1997 HD Ultra Classic, 1996 Buell S2T, 2002 BMW K1200RS, 1969 Royal Enfield Interceptor Triton project
New project 1979 GS1000S
Recently sold 1979 Honda CBX1000
Comment
Comment