.png "Powered by vBulletin")
Does anyone know that the torque values are for the bolts on the intake horns on a 81 850?
-
-
There is a listing of these values in the FSM for my bike.
Check to see if Basscliff has your manual on his site. -
yeah, ask Basscliff... he's all Torque and no trousers!!!!
(see what i did there... sorry basscliff)
XXXComment
-
I've looked in my maint. manual and it does not specify the intake boots.Comment
-
Torque--tighten till you hear it bark at least twice, Old school LMAO...sigpicMrBill Been a GSR member on and off since April 2002
1980 GS 750E Bought new in Feb of 1980
2015 CAN AM RTS
Stuff I've done to my bike:dancing: 1100E front end with new Sonic springs, 1100E swing arm conversion with new Progressive shocks installed, 530 sprockets/chain conversion, new SS brake lines, new brake pads. New SS fasteners through out. Rebuilt carbs, new EBC clutch springs and horn installed. New paint. Motor runs strong.Comment
-
Those are M6 bolts going into aluminum, so 6.0-7.5 lbs-ft.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
Thanks for the helpComment
Comment