.png "Powered by vBulletin")
Anyone have any ideas of where to find 5mm vacuum port fittings, so I can hook up a line 1/4" line for syncing my carbs?
The guy at Ace Hardware thought I was crazy.
The guy at Ace Hardware thought I was crazy.
-
-
Here's a source: http://www.motionpro.com/motorcycle/...hose_adapters/
Ted -
1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
look up the english equivalent they are very close to the same and are even interchanged in some places.Comment
-
i made mine, 5mm bolt, drilled a hole through it, drilled the hole larger in the head of the bolt epoxied a 1/8" plastic nipple into the head and hook them to the sync gage 4-way vave with aquarium air tubing. took about 2 hours to make four.Comment
Comment