Announcement

Collapse
No announcement yet.

Time for some work

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by condensr View Post
    What do you all use for assembly lube? My local supplier did not have molybdenum disulfide assembly lube, but they did have a different moly lube by Sta-Lube. Will that work?
    should work on the cam lobes and valve stem and tips just fine, don't go "hog" wild.
    oil the cam journals, crank it (w/o spark) till oil gets to the top end, then fire it up.
    Last edited by rustybronco; 06-16-2007, 11:20 AM.
    De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

    http://www.thegsresources.com/_forum...35#post1625535

    Comment


      #17
      Well, making a little progress.. Pistons cleaned, clutch cover off (gasket replacement)..

      Tomorrow I hope to get the oil pan off (cleaning of pan/screen) and flush the open bottom end (from the top - jugs are still off) with some kero then some oil. Try as I might, I couldn't keep 100% of the debris collected around things like the head studs from dropping down in to the engine during disassembly.

      Then the re-assembly starts! Hopefully I get time to work on it so it doesn't drag out too long.

      Comment

      Working...
      X