Announcement

Collapse
No announcement yet.

Mixing Synthetic & Dino Oil

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Mixing Synthetic & Dino Oil

    I was changing my oil and had some Rotella T 5W-40 full synthetic left over from another change and a some Castrol 10W-40. Any opinions on mixing the two? I would assume they are compatible but wanted any other opinions. I am possibly going to change over to full synthetic but wanted to ease it in and verify I do not get any leaks in the process. I have an 83 1100 8 valve motor. Thanks

    #2
    Mix

    I wouldn't mix the two except in an emergency but....a number of the guys have had good luck with the Rotella.
    1980 GS1100E....Number 15!

    Comment


      #3
      Mix away. No worry what so ever. They even sell mixed oils in the bottle.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment


        #4
        I mix and switch back and forth willy-nilly between synth and dino, and have never had a problem.

        Crikey, after 30 years, the urban legends surrounding synthetic oil just won't die...
        1983 GS850G, Cosmos Blue.
        2005 KLR685, Aztec Pink - Turd II.3, the ReReReTurdening
        2015 Yamaha FJ-09, Magma Red Power Corrupts...
        Eat more venison.

        Please provide details. The GSR Hive Mind is nearly omniscient, but not yet clairvoyant.

        Celeriter equita, converteque saepe.

        SUPPORT THIS SITE! DONATE TODAY!

        Co-host of "The Riding Obsession" sport-touring motorcycling podcast at tro.bike!

        Comment


          #5
          You'll blow up your engine.*
          1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
          1985 GS1150ES stock with 85 Red E bodywork.

          Comment


            #6
            Originally posted by chef1366 View Post
            You'll blow up your engine.*
            Bill, where the heck did you come up with that statement?! Mix the oil & have NO fears as there are no worries with blending the 2. Ray.

            Comment


              #7
              Originally posted by chef1366 View Post
              You'll blow up your engine.*
              and the star at the end of your statement indicates that it's a JOKE i guess
              GS850GT

              Comment


                #8
                As long as you use a blender, add a cherry & one of those little umbrella's. :-D

                Comment


                  #9
                  Thanks for the replies (well most of them :-D). I completed my oil change, went for a spin and my motor has not blown up yet but the day is still early. 8-[

                  Comment


                    #10
                    I don't think it'll be a problem. I accidentally did the same in my SV1000 and called my dealer in a panic. They told me most of the Suzuki brand synthetic is actually "blend" anyway- 1/2 syn 1/2 dino.

                    So I'd say you'll be OK. 8-)

                    Comment


                      #11
                      Originally posted by Nessism View Post
                      Mix away. No worry what so ever. They even sell mixed oils in the bottle.
                      ditto\\/

                      Comment


                        #12
                        I've been mixing oils for years.

                        Just add clean, fresh oil when necessary to top off the crankcase, without overfilling. Mixing dino 10W40 with existing Rotella will be no problem.

                        The important thing is to keep the oil level where it should be, at all times.

                        Comment


                          #13
                          Originally posted by chef1366 View Post
                          You'll blow up your engine.*
                          JOKE..............
                          1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
                          1985 GS1150ES stock with 85 Red E bodywork.

                          Comment


                            #14
                            The only thing I suggest you don't mix with it is alkeyhaul.
                            De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

                            http://www.thegsresources.com/_forum...35#post1625535

                            Comment


                              #15
                              How bout this one.... Manuals say 10w40. I just filled with 15w40...why? Cos she seems to like it better. And its starting to get nice and warm around here. Supposed to hit 91 in the next day or so!!

                              Comment

                              Working...
                              X