im not sure how far to take the revs in each gear ??what would be a normal reading??
Announcement
Collapse
No announcement yet.
revs in each gear?
Collapse
X
-
ccrxxx
revs in each gear?
hi, on my chop 550 `85 it had no rev counter so i bought an after market one which wires to the coil.
im not sure how far to take the revs in each gear ??what would be a normal reading??Tags: None
-
80GS750
you mean whats the highest you can rev it up?
i switch gears between 3-5k
but it will redline around 7-8k i think.... someone on here can tell you the top rpm of your motor
-
SqDancerLynn1
the 550 redline is about 9500 I think If you are looking for milage shift 3-3500, Fun 6K, max fun 8-9K..
Make sure the tack is reading properly & not 1/2 speed
Comment
-
ccrxxx
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter- Jul 2005
- 15153
- Marysville, Michigan
if it sounds like it going to explode and the tach shows 4,500 to 5,000 rpms, that would be a good indication of the tach registering 1/2 of the engine rpm's
if that is the case, please don't try for 6,000.
Comment
-
JayH
Originally posted by rustybronco View Postif it sounds like it going to explode and the tach shows 4,500 to 5,000 rpms, that would be a good indication of the tach registering 1/2 of the engine rpm's
if that is the case, please don't try for 6,000.
Comment
-
ccrxxx
hi, took each gear to 6000 and it sounded good .so i think its working correct .. cheers ........
Comment
Comment