i have a question about the oil i bought. i have read a few threads that recomend a sae of a lower letter . i bought this oil at the local wally world . it says it's for vehicles of 1988 or earlier. it's rated at sae sf.. the oil looks almost clear compared to todays car motor oil. the only thing that makes me wonder is it says it heavy duty detergent motor oil. anyone think this would be ok.i'd hate to have to drain it and waste it.
Announcement
Collapse
No announcement yet.
question about oil i bought
Collapse
X
-
coolgoldtiger
question about oil i bought
hi
i have a question about the oil i bought. i have read a few threads that recomend a sae of a lower letter . i bought this oil at the local wally world . it says it's for vehicles of 1988 or earlier. it's rated at sae sf.. the oil looks almost clear compared to todays car motor oil. the only thing that makes me wonder is it says it heavy duty detergent motor oil. anyone think this would be ok.i'd hate to have to drain it and waste it.Tags: None
-
BassCliff
Hi Mr. coolgoldtiger,
If your oil is 10w-40 or 20w-50 and does not say "energy conserving", then you are good to go, my friend. Change it every 1500 miles and it doesn't much matter what you use. I always change the filter when I change to oil too.
Thank you for your indulgence,
BassCliff
-
Forum SageCharter Member
Past Site Supporter- May 2002
- 3869
- The Gulf Coast of south Florida in the winter and northern Nevada in the summer
Oil
Well, it may be perfectly fine. Tell us what kind of oil it is and what the weight is. It's probably OK but you've certainly done no damage. Just explain what it is and you'll get some good feedback.1980 GS1100E....Number 15!
Comment
-
coolgoldtiger
oil
thanks guys . it's great to have such a huge resource of people who know so much about gs's. the oil is 10w 40 . it doesn't say anything about enery conserving. the company name is accel. and it says "for api service sf. and that it's for model years 1988 or earlier.and that it's an all season multi vicosity,heavy duty detergent motoroil recommended for older model cars prior to 1989. it just looked so clear when i poured it into the bike. this is my first bike and it looked differant then car oil which is that light caramel color. i didn't get all the parts for the carbs ( bought the 4 intake boots ,but never ordered the o rings untill i looked at the boots and realized that they never came with them.lol live and learn) so the bike hasen't ran yet . the oil that was in there was blacker then black , but the filter didn't have any metalic bits in it. so thats a good sign.the oil did smell real gassy, is that normal for bikes. maybe do to the fact that the oil was long over due for a change?
Comment
-
bleeble
The oil smelled gassy because there was gas in it. Definitely not normal. Probably caused by a leaky petcock.
Comment
-
Macmatic
Originally posted by coolgoldtiger View Posti didn't get all the parts for the carbs ( bought the 4 intake boots ,but never ordered the o rings untill i looked at the boots and realized that they never came with them.lol live and learn) so the bike hasen't ran yet . the oil that was in there was blacker then black , but the filter didn't have any metalic bits in it. so thats a good sign.the oil did smell real gassy, is that normal for bikes. maybe do to the fact that the oil was long over due for a change?
Did you get intake o-rings yet? If not PM me your year and model and I'll send you out a set "on the house", I should have them on the shelf.
Welcome to the forums and GS's!
/\/\ac
Comment
-
SqDancerLynn1
I like to run Shell Rotella T SAE 15-40 in my 850. It has some extra shear propertys for diesel motors. that work good in the transmission PLUS it is $10 a gallon. As those at the June ride will attest to my bike runs good
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35605
- Torrance, CA
Originally posted by SqDancerLynn1 View PostI like to run Shell Rotella T SAE 15-40 in my 850. It has some extra shear propertys for diesel motors. that work good in the transmission PLUS it is $10 a gallon. As those at the June ride will attest to my bike runs goodEd
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
Dragging those saddle bags again Lynn??1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
-
BassCliff
Hey Ms. SqDancerLynn1,
You and I should go shopping for oil sometime. I could do without paying $4.29 a quart. I'll try to keep up with you!
Thank you for your indulgence,
BassCliff
Comment
-
kichigai
I recently switched to the Synthetic Rotella T oil too for my GS1100esd. My bike seems to run good with it too.
Originally posted by SqDancerLynn1 View PostI like to run Shell Rotella T SAE 15-40 in my 850. It has some extra shear propertys for diesel motors. that work good in the transmission PLUS it is $10 a gallon. As those at the June ride will attest to my bike runs good
Comment
-
Originally posted by SqDancerLynn1 View PostI like to run Shell Rotella T SAE 15-40 in my 850. It ... is $10 a gallon.
Still not bad, though, compared to the $pecial motorcycle oils from the dealer.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)
Comment
-
Forum LongTimerBard Award Winner
GSResource Superstar
Past Site Supporter- Jul 2005
- 15152
- Marysville, Michigan
Originally posted by Steve View PostAt that price, I should have you buy some for me and ship it. Last time I looked at Wal-Mart, it was just under $18.
Still not bad, though, compared to the $pecial motorcycle oils from the dealer.
.
Still have 4 gallons of it on the shelf, 2 gallons of 5w40 and about 10 quarts of 75w90 synthetic axle lube. I should be good for a while.
Comment
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35605
- Torrance, CA
Originally posted by Steve View PostAt that price, I should have you buy some for me and ship it. Last time I looked at Wal-Mart, it was just under $18.
Still not bad, though, compared to the $pecial motorcycle oils from the dealer.
.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
82Shafty
I run Motorcraft 15-40 HDEO... I can vow that it shifts smoother and runs quieter than when I had the regular rotella T 15/40 flavor. I wanted to find a VOA on it to compare additives of MC vs Rot T
I believe that just about any HDEO (Heavy Duty Engine Oil) will keep the bikes operating just fine, I heard Delo recently added Moly, which by word of mouth, supposedly causes wet-clutches to slip.
Comment
Comment