carb model info

[Banshee]

could anyone please help?
I have a 79 gs750 and was wondering what other bikes use the vm26ss as i have only 3 working ones and 1 which missing.

cheers B

[Big T]

older 750s
78-79 1000s
79 850

all use vm26

What did you break?

[Banshee]

duno what was broken only had 3 with the thing i supose the last owner broke it or ate it

[jknappsax]

Is it a #1 or #2, or #3 or #4. You might want to post in the Items Wanted forum; a lot of folks might have what you need.

[rustybronco]

The end carbs, Numbers 1 and 4 will have no holes drilled in both the fuel passages (the larger holes) and vent passages, on the outer sides of the carbs.
the sides of each carb nearest to no's 2 and 3 will have completed passages.

number 2 will have completed passages in all the fuel and vent passages on both of the outer sides .

number 3 will be just like number 2 EXCEPT it will have a "bb" plugging one of the vent passages (the one the vacuum line connects to) under the float.

fuel passages starting with #1 outer...
<plugged-open>-"connector"-<open-open>-"fuel tee"-<open-open>-connector-<open-plugged>

vent passages starting with#1 outer...
<plugged-open>-hose-<open-plugged>-"nothing"-<plugged-open>-hose-<open-plugged>

which carb are you missing?

carb view from the air box side...

http://s32.photobucket.com/albums/d44/rustybronco/?action=view&current=PICT2564.jpg

[Banshee]

i will have a look as there off the frame at the mo

[Banshee]

Ok sorry it took so long my pc went pop and had a smoke
but its the right hand side one on the end as you look from the rear of the bike

[rustybronco]

That would be the #4 carb.