Man i hope your wrong but who knows the starter clutch "seams" to be working properly now it will freewheel and when i tried spinning it over with a screwdriver it felt like it was trying to turn the motor over. It is suppose to be a fresh motor and when I had the plugs out of it the top of the pistons looked nice and new, but that doesn't mean it wasn't junk when it was put together.
Announcement
Collapse
No announcement yet.
New to the GS can someone give me a little advice
Collapse
X
-
rocz
Originally posted by blowerbike View Post
Man i hope your wrong but who knows the starter clutch "seams" to be working properly now it will freewheel and when i tried spinning it over with a screwdriver it felt like it was trying to turn the motor over. It is suppose to be a fresh motor and when I had the plugs out of it the top of the pistons looked nice and new, but that doesn't mean it wasn't junk when it was put together.
-
If you can see the top of the pistons you will either see flat pistons with slight indentations for the valves (normal compression) or deep pockets for the valves with a rise in the center of the piston (high compression)1983 GS 1100E w/ 1230 kit, .340 lift Web Cams, Ape heavy duty valve springs, 83 1100 head with 1.5mm oversized SS intake valves, 1150 crank, Vance and Hines 1150 SuperHub, Star Racing high volume oil pump gears, 36mm carebs Dynojet stage 3 jet kit, Posplayr's SSPB, Progressive rear shocks and fork springs, Dyna 2000, Dynatek green coils and Vance & Hines 4-1 exhaust.
1985 GS1150ES stock with 85 Red E bodywork.
Comment
Comment