Announcement

Collapse
No announcement yet.

Coil question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Coil question

    Today i checked my coils cap to cap with a Ohm-meter, Coil Cyl 1-4 shows 23,6k and Coil Cyl 2-3 shows 25,8k. Manual says 30k-50k .Are the coils too bad.I have change the wires to Accel yellow and new NGK caps,with a 5 ohm resistor.

    #2
    They're just fine at 23.6 and 25.8 K...
    De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

    http://www.thegsresources.com/_forum...35#post1625535

    Comment


      #3
      Are your accell wires solid core or suppression?? If they are supression you need to use automotive type plug ends.

      Comment


        #4
        Originally posted by Tompasio View Post
        ... and new NGK caps,with a 5 ohm resistor.
        Probably a 5K ohm resistor, but we knew what you meant.

        .
        sigpic
        mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
        hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
        #1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
        #2 son: 1980 GS1000G
        Family Portrait
        Siblings and Spouses
        Mom's first ride
        Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
        (Click on my username in the upper-left corner for e-mail info.)

        Comment


          #5
          Originally posted by Steve View Post
          Probably a 5K ohm resistor, but we knew what you meant.

          .
          Thanks Steve,My english is a bit rusty.

          Comment


            #6
            Originally posted by SqDancerLynn1 View Post
            Are your accell wires solid core or suppression?? If they are supression you need to use automotive type plug ends.
            I have copper core.

            Comment

            Working...
            X