Announcement

Collapse
No announcement yet.

CrankShaft

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    CrankShaft

    I am trying to get my signal generator plate off of the bike to replace it. It is stuck behind the crankshaft end plate. Held on by a 19mm Hex bolt and a 7mm allen bolt in the center.



    Any attemps to remove either are not looking good and I am worried that the bolt is stripping. Is there a special tool, or a certain way to do this. I cannot find any descriptions in the manuals I have.

    Can anyone offer me any help who has had this problem before??

    #2
    Rattle gun!!! soak in pentrating fluid for a few days. BTW it is a 10mm bolt and a 19mm bolt, I used a breaker bar, put bike in gear, and place a foot on the rear brake.

    Dink

    Comment


      #3
      Originally posted by Dink View Post
      Rattle gun!!! soak in pentrating fluid for a few days. BTW it is a 10mm bolt and a 19mm bolt, I used a breaker bar, put bike in gear, and place a foot on the rear brake.

      Dink
      What's a rattle gun? You mean an impact?

      Comment


        #4
        ?

        Rattle gun is the tool the tyre people use when they change ure car wheels

        Comment


          #5
          Originally posted by sharpy View Post
          Rattle gun is the tool the tyre people use when they change ure car wheels
          Ah an impact then lol

          Comment

          Working...
          X