gs 1100 cams

[Guest]

can the cams on the 1100-1150 be used on either side (ex on intake -intake on ex) like on the shim motors???

[blowerbike]

no,
they have a different ramp.

[4cyl h2]

so say to run g21 cams on both sides ( or any other grind) a cam company would have to grind for intake or ex what a bummer sure is nice on the shim engines

[blowerbike]

you can look at the cams and see how the ramps are made for each.
it's a rocker arm thing.
the shim heads don't care.

[4cyl h2]

also have some people locally telling me the 1100-1150s like as much duration or more on the exhaust as the intake? plan for now is a well ported but stock valve 1100 head and a 13.5 -1 1260 bracket engine may decide to lower to 10.5-11 to1 so can use as street engine any thoughts? plan is to use 40 lectrons for track and 36 or 38 mikunis for street 200 lb rider

[rapidray]

also have some people locally telling me the 1100-1150s like as much duration or more on the exhaust as the intake? plan for now is a well ported but stock valve 1100 head and a 13.5 -1 1260 bracket engine may decide to lower to 10.5-11 to1 so can use as street engine any thoughts? plan is to use 40 lectrons for track and 36 or 38 mikunis for street 200 lb rider

Give me a call at 714--356-784five when you get a chance. I have some specific questions for you to help you out.
Ray.

[4cyl h2]

Give me a call at 714--356-784five when you get a chance. I have some specific questions for you to help you out.
Ray.

will do whens a good time your time zone during the week

[rapidray]

will do whens a good time your time zone during the week

I am Pacific time zone & work 2:30 pm-1:00 am. I get lunch at 7:00 pm so that is the best time if you call after 2:30. Usually, noon-2:30 pm is easiest to get me.
Ray.