turn signal parts needed

[zuesdawg]

the actual switch broke off of my 82 gs650gl, well really vibrated off. any leads on where I can get parts?

[Detman101]

Definitely ebay.
I got my new Left hand controls from there for cheap.

Dm of mD

[Billy Ricks]

They don't have to be model specific unless you are trying to keep it original. I have a set of GSXR switches to mount someday.

[Anonymous]

Same thing happened to me. I haven't fixed it yet so post here if you are going to bid on something so we don't drive the prices up on each other.

[Anonymous]

switch gear

Hello
Go with the late modle Katana or GSXR switch gear. as long as you match up the wires. If the connectors turn out to be of different configurations. Put on your own connectors or solder them together and cover with shrink wrap tubing.

Best of luck, Archie

[Anonymous]

They don't have to be model specific unless you are trying to keep it original. I have a set of GSXR switches to mount someday.

My 82 1100E has self-cancelling turn signals. Some other models don't. How do you know which models are compatible?

Michael

[Billy Ricks]

Ask the seller. The switchgear I picked up is set up for self-cancelling, don't remember what year though. Some 2k or later model I believe. You could also check Bikebandit.

[Anonymous]

Hi just being able to push the switch inwards is a major improvement.
I don't know how many times I've tried to cxl my turnsignal and the opposite turn signal comes on
Mikey

[Mahalaleel]

Resurrecting this thread to ask if modern or aftermarket controls are compatible with 1978 GS750E.

My turn signal button is broken off and PO wired it ghetto style. Can still signal if I use my fingernails!

Also, the RH switches/throttle spin around the handlebar. I heard there was supposed to be a hole in the handlebars that a little dongle would go into from the switches, but there is no such hole on my handlebars, and no such dongle. Gluing seems like a bad idea...right?

[tom203]

Resurrecting this thread to ask if modern or aftermarket controls are compatible with 1978 GS750E.

My turn signal button is broken off and PO wired it ghetto style. Can still signal if I use my fingernails!

Also, the RH switches/throttle spin around the handlebar. I heard there was supposed to be a hole in the handlebars that a little dongle would go into from the switches, but there is no such hole on my handlebars, and no such dongle. Gluing seems like a bad idea...right?

Unless, your prepared to do wiring, I wouldn't stray too far from the year of your bike. Ebay always has sellers with this stuff. Get replacements and be safe.