Located a KZ550 VM22SS #3 for cheap but identified 2x issues - no vacuum line and no air screw. So I'm going to add them. Pictures to follow.
Announcement
Collapse
No announcement yet.
Using KZ carbs on the GS
Collapse
X
-
Using KZ carbs on the GS
Been struggling to find a #3 carb for my GS550 since the PO smashed off the pilot screw tip and then wallowed out the jet removing it.
Located a KZ550 VM22SS #3 for cheap but identified 2x issues - no vacuum line and no air screw. So I'm going to add them. Pictures to follow.Tags: None
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35697
- Torrance, CA
Those KZ carbs are made by TK, not Mikuni.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
-
aclaytonb
-
Forum LongTimerGSResource Superstar
Past Site Supporter
Super Site Supporter- Mar 2006
- 35697
- Torrance, CA
They are not from a 550 then. The KZ650 used VM22's though.Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection
Comment
-
aclaytonb
Mmmm. Well, I'm not done yet but I'm done for the night. Gotta check kids homework and chase them to bed. Coming along. Still need to tap the air screw hole but it looks promising.
Comment
Comment