Announcement

Collapse
No announcement yet.

De-stinking Penelope

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Welded plenty stainless dairy tubing in the past, but only with a TIG welder, there was no special technique to it, sorry Doc, that's all I got.

    Comment


      Thanks Stan, I figured you'd chime in on the subject.

      If it wasn't a big deal to weld it with TIG then I guess I'll run some practice stringers on a piece of scrap then have at the real thing.
      De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

      http://www.thegsresources.com/_forum...35#post1625535

      Comment


        Just out of curiosity, are you planning on painting the bodywork yourself Dale ? Sure was impressed with what Stan did......
        Old age and treachery will beat youth and skill every time1983 GS 750
        https://c1.staticflickr.com/5/4256/3...8bf549ee_t.jpghttps://c1.staticflickr.com/5/4196/3...cab9f62d_t.jpg

        Comment


          Garth, yes I will be painting them myself. So far not one piece has been farmed out.
          Originally posted by bccap View Post
          Sure was impressed with what Stan did......
          So was I!
          De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

          http://www.thegsresources.com/_forum...35#post1625535

          Comment


            Garth, I could not do a half decent rattle can job until Doc and Larry put me on the right path, I have no doubt it will be stunning.
            I could tell you about a certain seat pan that was done but unfortunately a fly paid a visit to it and left 3 little foot prints on it...............but that is a story for another time.

            Comment


              Are you speaking of one you did, or the one I did? If it's one you did, what's up with seat pans and paint damage?
              De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

              http://www.thegsresources.com/_forum...35#post1625535

              Comment


                Hahahaha, the one you did, I never did one.

                Comment


                  Ah, the one that was on the paint stand padding and rolled off. Three coats of black and three coats of clear and the padding had to roll and **** my hard work up. Still ticks me off!

                  By the way, if you look at Nancy you will see that pan sitting where the factory seat should be. Paint booth is next on the ajenda along with making a blasting booth. (and about a hundred other projects)
                  De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

                  http://www.thegsresources.com/_forum...35#post1625535

                  Comment


                    Back on track...

                    Had an out of town wedding to attend over the past two days. Tried to hook up with Redman (Dave) while I was there but our schedule wouldn't allow it.

                    Tank is being de-rusted as I type. Caswell is in the garage coming up to room temp. I sure hope it cools off this evening so I can rinse and re-line it. (it's 87.1° outside now)

                    It looks nice and gray inside the tank but I'm sure it won't stay that way for long.




                    De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

                    http://www.thegsresources.com/_forum...35#post1625535

                    Comment


                      A piece of chain and a little bit of shaking and we can see bright metal inside.

                      De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

                      http://www.thegsresources.com/_forum...35#post1625535

                      Comment


                        Its refreshing to see that you are getting time to do something on YOUR bike for a change..HA HA. I am in the save money for next spring mode right now so we will have to take the twins for a putt together.
                        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                        Comment


                          Looking forward to it Chuck!

                          Well the excess Caswell epoxy is draining out of the tank.

                          If you ever do this I highly recommend you put lots of plastic sheeting down on whatever work surface you plan on doing it on. What a mess...
                          De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

                          http://www.thegsresources.com/_forum...35#post1625535

                          Comment


                            I also run some well greased set screws up the petcock bolt holes. This keeps the stuff out of the threads. The other alternative is to run a tap thru the holes once its dried and hope like he!! you dont ruin the originals.
                            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                            Comment


                              And you can take the excess as its draining and smear it over any welded spots, suspect dents, or anything else you may wish to be sure is sealed from both sides. Sand it and paint over the patching.
                              MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
                              1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

                              NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


                              I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

                              Comment


                                Originally posted by chuck hahn View Post
                                I also run some well greased set screws up the petcock bolt holes. This keeps the stuff out of the threads. The other alternative is to run a tap thru the holes once its dried and hope like he!! you dont ruin the originals.
                                Well greased screws are already in the holes. The block off plates are removed and the petcock opening has been trimmed of excess sealer. The only thing left is to clear the small vent hole in the fuel filler neck.

                                Now comes the fun part.
                                De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

                                http://www.thegsresources.com/_forum...35#post1625535

                                Comment

                                Working...
                                X