Announcement

Collapse
No announcement yet.

Is there a difference in seats?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Is there a difference in seats?

    Ok since I am helping my son on his 81 gs1000gx the seat extension or rear cover what ever it's called doesn't line up with the seat. Is there different seats on the 1000's? this bike had a touring pack on it and he ordered tail piece from ebay it said for gs850-1100's. The seat sits a 1/4" past from on the right said.

    #2
    Do you have any pictures of the area in question?
    De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

    http://www.thegsresources.com/_forum...35#post1625535

    Comment


      #3
      This is only pic I have right now.

      Comment


        #4
        The seat looks correct for an 80-81 GS850-1000G model.

        try loosening the seat hinges and moving the seat to see if that helps. do the two arms (rear section of the frame) appear to be bent side to side not allowing the tail piece to align properly to the seat?

        off hand, those are the only things I can think of which may cause your issue.
        De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

        http://www.thegsresources.com/_forum...35#post1625535

        Comment


          #5
          Getting those seats to line up flush and centered on the tailpiece can take some doing. I had the same problems, by loosening the nuts that hold on the tail piece it will give some play to shift it forward and back and side to side. The big problem was the seat, somehow it was just too far to the right. The seat pan was twisted so I straightened that out to where it sat flush on bike frame. Then I found the big culprit, the rear seat hinge was bent, I straightened that out and also there's some play in the hinge bolts and by trial and error got those in the right spot. Finally it came out to the point where I don't think I could do any better and it fit as well as any new bike did.

          Here's a before shot:


          And here's a after shot: Of course the seat has been re-covered, and the tail piece repainted, I can move up the tail piece a little more, but I didn't want the seat to chaffe against the tail piece, more so the tool tray flap that bows out somewhat towards the seat, so I left a small gap there.
          sigpic
          Steve
          "The world is a book, and those who do not travel read only one page." :cool:
          _________________
          '79 GS1000EN
          '82 GS1100EZ

          Comment


            #6
            Thanks I'll try that and see if tweaking everything helps.Once I tackle that project and he finds a left side cover I can finish painting everything.this is the color he chose not sure what color it is except made by Dupli Color it's actually more blue after clear.

            Comment


              #7
              How about this color blue? I think it's very pretty. This is a '80 GS1000E.

              sigpic
              Steve
              "The world is a book, and those who do not travel read only one page." :cool:
              _________________
              '79 GS1000EN
              '82 GS1100EZ

              Comment

              Working...
              X