Announcement
Collapse
No announcement yet.
where to find Wes cooley pictures
Collapse
X
-
where to find Wes cooley pictures
I have been searching on the web and this forum for large pictures of the blue /white Wes Cooley race bike but no luck just low resolution pictures. Does any one have any pictures to share?? or info on the bike. I would like to do a a replica of some sort and it would be nice to see some larger pics for inspirationTags: None
-
Originally posted by killergs View PostIve seen several pics but nothing really up close. and what about the specs?1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!
Comment
-
killergs
-
killergs
saw that while back but its geared more on the red gs although pretty sure some of it got passed to the blue/white model. Do you know if he raced the blue/white in 80 or 81?
Comment
-
sigpic
Steve
"The world is a book, and those who do not travel read only one page." :cool:
_________________
'79 GS1000EN
'82 GS1100EZ
Comment
-
Can anyone gess the name of the guy in the lower right hand corner of the one picture?My Motorcycles:
22 Kawasaki Z900 RS (Candy Tone Blue)
22 BMW K1600GT (Probably been to a town near you)
82 1100e Drag Bike (needs race engine)
81 1100e Street Bike (with race engine)
79 1000e (all original)
82 850g (all original)
80 KZ 650F (needs restored)
Comment
-
killergs
Originally posted by 850 Combat View PostAre those Lockheed brakes? They look kind of like them. ARP makes them now I think.
Comment
-
it says in the article i linked to in post #6, which clearly says, lockheed calipers and master cylinder
The front brake master cylinder
and calipers are Lockheed. Braided
stainless steel lines from Earl's Supply
are 1/4-in. outside diameter. Front
brake discs are Suzuki, drilled for
lightness and to reduce warpage. The
Yoshimuras used plasma-sprayed
aluminum discs early in the season, but
found that the discs warped.
interestingly the rear caliper is a fully floating set up, with the torque arm attached to the frame, not the swingarm.1978 GS1085.
Just remember, an opinion without 3.14 is just an onion!
Comment
-
killergs
-
ozman
Originally posted by killergs View PostDoes anyone know the size of the 3 spoke dymag wheels as well as the tires??
im pretty sure they would be 18 inch most slicks back then were 18
most likely 2.5 front 3.5 or 4 inch rear
ozman
ok done some research
rear was a wm6 (3.5")
The Yoshimuras installed aSheene's Suzuki RG500.
Suzuki five spoke WM-6 magnesium
rear wheel originally made for Barry
and they found
Tsubaki #630 drive chain wouldn'trazor blade.
clear the rear tire (a Goodyear D 1997
3.75- 18 slick), so the left edge of the
tire had to be trimmed slightly with a
front a wm4(2.5") x 19
The WM-4 19-in. front wheel is
cast in magnesium by Morris andcarries a Goodyear 3.25-19 slick.
info is all here
Last edited by Guest; 08-16-2013, 09:10 PM.
Comment
Comment