Announcement

Collapse
No announcement yet.

Peace of mind

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Peace of mind

    Okay, I tried this and so far so good. Have seen the posts that deal with improved lighting so I tried the LED tail light bulb and like some people, I feel that it seems to be lacking. So I wired in 2 halogen lamps to act in conjunction with the brake lights. The lamps used were the same as you get in most desk lamps(push-in with two pin terminals).Just drill two holes and connect them with a file or dremel to form a slot big enough to allow the base of the lamp to be epoxied in place,I put one on either side of the tail light bulb. You can solder the wires directly to the pins on the lamp. Simply wire them into you brake light circuit. I used 20W lamps and even in daylight you will get noticed when you hit the binders,at night it is a big differance.
Working...
X