Announcement

Collapse
No announcement yet.

Miniature Static Timing Light

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Miniature Static Timing Light

    Well, the mighty 78 GS1000 left me stranded recently. It was my own fault...I had neglected the points...They closed up. Of course I knew it had points, but the last vehicle I had with 'em was a 67 VW. Had I maintained 'em, it wouldn't have happend...I knew better. End of story.

    If I would have had set of feeler gauges, and a way to static time the beast, I would have been back on the road in short order.

    Today when I swapped out the points, I whipped up a small portable miniature static timing light out of some stuff I had laying around.

    (this is the prototype)



    For any of you that want to make one for yourself, all you need is two alligator clips, a 2.2K 1/4 watt resistor and a 5mm LED in your fav-o-rite color. I had all this in ye olde electronic parts box, but most of you will have to make a trip to Radio Shack.

    Works like a charm, and it's small enough you can stash it somewhere on the bike. Viola!


    #2
    Great idea, looks better than a 12v light bulb.

    l.e.d.'s are polarity sensitive, usually if it has a flat spot on the side of the plastic that's the negative lead, or if it has one leg longer than the other it's the positive lead.
    De-stinking Penelope http://thegsresources.com/_forum/sho...d.php?t=179245

    http://www.thegsresources.com/_forum...35#post1625535

    Comment


      #3
      Thanks, RB. I should have mentioned that... :-D
      I guess I figured anyone that had a soldering iron would already know.

      Comment


        #4
        He knows electronics, yet can't figure out what the little flower is for on his digicam........

        Comment

        Working...
        X