1997 Yamaha yzf1000 Thunderace

[Oldman99]

Yep, Had that site bookmarked for a long time.

 

[thebrandonbeezy]

I really like this, i just picked up a 93 fzr1000 with the ex-up set up. Im wondering if its the same as the yzf?

 

[Buffalo Bill]

I really like this, i just picked up a 93 fzr1000 with the ex-up set up. Im wondering if its the same as the yzf?

I know it has the same function, and if you take it off the bike, you've f_cked it up bad.

 

[GS1150Pilot]

I removed the EXUP from my FZ1 when I mounted the first Holeshot header made for that bike along with his exhaust canister and an Ivan's jet kit with K&Ns. Bike ran flawlessly.

 

[Oldman99]

I really like this, i just picked up a 93 fzr1000 with the ex-up set up. Im wondering if its the same as the yzf?

I think the engine is the same. Some burn oil and some don't. It's weird like that.

 

[Oldman99]

When the exup system works, it's fine. I re-lubed the valve and adjusted the cables.
Today's project was to re-route the wire harness. This bike came with a very pretty full fairing, but the last owner took care of that.
The wire loom was ran on the outside of the frame (I assume) because it was easier. I was worried that the first time I lay her down or drop it.
I'd lose half my harness. Removed the tank, tail fairing, and airbox. Used zip ties to keep it away from anything hot or moving.
Now onto the weird part.
My cooling fans now come on when the key is switched on. The oil pressure light functions as it should. (lights up when the key is on and turns off when the engine is started) The fault warning stopped( tac needle pointed to 8k ever 6 secounds) Now the tac works as it should.
I'm sure there's a short somewhere, I just can't find it.

before

after

 

[thebrandonbeezy]

Im assumimg that you are posting this here because all the yamaha forums that pertain to the older bikes like the yzf and fzr take ages to approve new members lol.

 

[Oldman99]

Im assumimg that you are posting this here because all the yamaha forums that pertain to the older bikes like the yzf and fzr take ages to approve new members lol.

Yes and I've got my gs450 running like new thanks to everyone here. I like that this site is not loaded with a lot of children who think they are adults just because they do 160 on a public road.

 

[Oldman99]

Had one of my bar-end mirrors fall off. It was mounted by twisting a bolt and that would expand a flair nut on the inside of the bar. It did not expand enough. I used some threaded rod and washers with nuts from one end of each bar to the other. Works well so far.

 

[thebrandonbeezy]

I like that, i got lucky on my kat handle bars. They had a threaded tab welded in from the factory so i just bolted the bar end in like it was the factory slider

 

[Oldman99]

Finally bought the new front sprocket. Went from a stock 17 to a 15.
It was sooo dirty. There was 1/2 a pound of old grease. Lots of stuff that looks like floor dry. I still want to replace the lock ring that keeps the nut on the sprocket in place. Found a gear selector switch near the shifter rod. It's only used for neutral atm.

 

[rphillips]

Be careful, 2 teeth down on the front will be pretty drastic, about like 6 teeth up on the back.

 

[Oldman99]

Be careful, 2 teeth down on the front will be pretty drastic, about like 6 teeth up on the back.

Yes, but I've never had a reason to go 160 mph anyway.
I went for a test ride after posting the pics and I like it so far. It still feels powerful, but now it's useable power. I use it to mostly to commute to and from work. Being able to do the set speed limits without lugging or revving it to the moon is what I care about the most.

 

[thebrandonbeezy]

Bet it does dank whoolies easy as pie now

 

[rphillips]

Seems like riding in 5th with new sprocket would be like riding in 4th with orig sprocket, excessive RPM at hwy. speed, but very easily smoke the tire in lower gears. Not ridden a YZF 1000, so not speaking from experience.

 

[Oldman99]

Seems like riding in 5th with new sprocket would be like riding in 4th with orig sprocket, excessive RPM at hwy. speed, but very easily smoke the tire in lower gears. Not ridden a YZF 1000, so not speaking from experience.

From http://www.gearingcommander.com/.
5k rpm at 70mph seems about right.

 

[rphillips]

Yep, According to those #'s, 5th gear now, at 5006, is almost exactly what 4th was, at 5001, with stock sprocket. Pretty drastic, & gets way more drastic in lower gears, be careful!

 

[Oldman99]

My new-to-me belly pan with authentic battle damage!
It's the stock one I got from Ebay for $40. I think it looks too naked without something on the underside.

 

[GS1150Pilot]

Justin, something like this beast would be the ultimate hooligan machine.

 

[Oldman99]

Made some 3 point mounts.

Side view. Still need to get new heat mat to line the inside with.