Missing brass bead on BS32SS Carb

[081dbx64]

I don't know if this mattes or not. The bike seems to run great. It does seem to run a little hot but will double check next time out.

There seems to be a missing brass bead that is supposed to be in one of the ports/holes in the carburetor body. Do any of you think this matters? I have attached a picture.

http://picasaweb.google.com/lh/photo/WpLdEcDLaPem4rP002Bp2RnITBy_Jc3EnbzCzWLPRgk?feat=directlink

 

[Guest]

i can't see the pic here at work, but those little brass beads are used to plug an access hole that was used to connect internal passages...

i would think it's very much needed; otherwise whatever is flowing through that passage way isn't going where it's supposed to.

 

[081dbx64]

Crap! Where do I get new ones?

Here is the link again

 

[Guest]

Does the other carbs have one there?

 

[081dbx64]

Actually...it looks like the other ones are not there either. It's been 20 years since I rode the bike. I took it to a person to have the carburetors cleaned and Saturday was my first ride. It seems to be running a little hot. After 5 hours of riding it was smoking a little..I noticed it when I was at an intersection. I guess taking a good look at it it seemed that hole should not be there.

Hmm

 

[crazypaint]

my 1100 carbs on my bike are the same way dont think anything goes there. my other 110 carbs are like that also

 

[Guest]

Maybe you have an oil leak?

 

[Larry D]

Actually...it looks like the other ones are not there either. It's been 20 years since I rode the bike. I took it to a person to have the carburetors cleaned and Saturday was my first ride. It seems to be running a little hot. After 5 hours of riding it was smoking a little..I noticed it when I was at an intersection. I guess taking a good look at it it seemed that hole should not be there.

Hmm

Pull the plugs and see if they are white, it may be a little lean. Or, it could just be 20 years of gunk in and around the engine getting hot.

I'd pull the plugs to make sure. What exactly did the guy do when he rebuild the carbs ?

 

[081dbx64]

Oops! Checked the crank case hose. Apparently that is the source of the smoke. Hooked it up to the intake box. It seems to run a little better...lets see how it works when I first start it. Was having a little problem keeping it idling.

 

[TheCafeKid]

Not all of the carbs have a brass bead in the same place. For instance, the number two would have a port blocked that the others would not because it needs to create vacuum for the petcock. If the bike is running on all four cylinders And seems to run pretty good even if a little hot I'd suspect that you're not missing anything. Those "beads" are either pressed in or moulded in and I really don't see how they could come out without other damage be
ing rather apparent.

 

[Danjal]

Brass bead or not it looks like its plugged internally still. Adding in that brass bead from then on would just make it look pretty unless thats dirt im seeing built up in there.

I would keep an eye on it and ride if for a while see if if works all the 20 years of non running out.