G
Guest
Guest
Love this one..
-
Required reading for all forum users!!!
Welcome!
Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.A note to new registrants...
All new forum registrations must be activated via email before you have full access to the forum.A Special Note about Email accounts!
DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.A note to old forum members...
I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.
Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...
-
Returning Visitors
If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.
If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.
P
patrino
Guest
Looks like the forks aren't first-gen GSX-R600 after all. I'll post some detailed photos soon, would appreciate an ID if anyone recognizes them.
M
mrbridgeport
Guest
Sweet find!
P
patrino
Guest
GregT, I looked, yes the carbs are 29s.
Finally took the bike out for a spin around the block (hadn't started it yet), wow, it pulls like a freight train!
Looks like the forks are first-gen GSX-R750, with the anti-dive framas welded up.
Finally took the bike out for a spin around the block (hadn't started it yet), wow, it pulls like a freight train!
Looks like the forks are first-gen GSX-R750, with the anti-dive framas welded up.
P
patrino
Guest
Ordered some emulators and springs from RaceTech, hoping to put them in over the weekend. Started building a new seat last weekend.
My budget is what it is, and I'm longer on time than I am on $. To that end I just bought a set of old used cam sprockets, with the intent to degree the stock GS cams. I have a machinist friend who can slot the sprockets for me.
Is this a total waste of time? If not, does anyone know the "magic numbers" I'm looking for? Stock settings? Something else?
I've got the bits I need to do the work (degree wheel, dial indicator, piston stop, etc.), just curious if anyone has experience with this.
At this point buying a set of performance cams is not on the table.
Thanks, Patrick
My budget is what it is, and I'm longer on time than I am on $. To that end I just bought a set of old used cam sprockets, with the intent to degree the stock GS cams. I have a machinist friend who can slot the sprockets for me.
Is this a total waste of time? If not, does anyone know the "magic numbers" I'm looking for? Stock settings? Something else?
I've got the bits I need to do the work (degree wheel, dial indicator, piston stop, etc.), just curious if anyone has experience with this.
At this point buying a set of performance cams is not on the table.
Thanks, Patrick
P
patrino
Guest
Slow and steady.
RaceTech parts should be here today, hope to put them in Friday.
Steering damper showed up today, still waiting on the fork bracket for it.
Next big chunk of work is to work on the front brakes. The previous owner fabricated hanger plates for the EX500 calipers. They're spaced left-right correctly, but sit too far off the disc - see photos. I'd guess surface-area-wise, less than 60% of the pads were actually contacting the rotors.
I either need to make some new hangers or fit new discs. Again, given that I'm longer on time than $ this winter, I'll probably just buy some new brake pads and get some new hangers. I bought some thin sheet aluminum to make prototypes (bolt centers, spacing, etc.), and will probably ask a local shop to fabricate the real deals. Taking a look at them, then can be brought much closer in to the fork tube, that's probably not a bad idea too, as far as stiffness in the system goes.
I also want to do away with the washer stackup on the RH side. I'm not sure if the front calipers need to be removed to take off the front wheel, but given that I've got a set of rains, and that I live in the Pacific Northwest, I don't want to deal with losing a washer if I have to swap them out. So I'll either have one-piece hangers made, or else get a piece of stock to replace the washers.
RaceTech parts should be here today, hope to put them in Friday.
Steering damper showed up today, still waiting on the fork bracket for it.
Next big chunk of work is to work on the front brakes. The previous owner fabricated hanger plates for the EX500 calipers. They're spaced left-right correctly, but sit too far off the disc - see photos. I'd guess surface-area-wise, less than 60% of the pads were actually contacting the rotors.
I either need to make some new hangers or fit new discs. Again, given that I'm longer on time than $ this winter, I'll probably just buy some new brake pads and get some new hangers. I bought some thin sheet aluminum to make prototypes (bolt centers, spacing, etc.), and will probably ask a local shop to fabricate the real deals. Taking a look at them, then can be brought much closer in to the fork tube, that's probably not a bad idea too, as far as stiffness in the system goes.
I also want to do away with the washer stackup on the RH side. I'm not sure if the front calipers need to be removed to take off the front wheel, but given that I've got a set of rains, and that I live in the Pacific Northwest, I don't want to deal with losing a washer if I have to swap them out. So I'll either have one-piece hangers made, or else get a piece of stock to replace the washers.
Yes, they can and should be tidied up, including using more of the pad...
The piece of thick sheet used as a spacer should be duplicated for the other side. If I have it right, when swapping wheels you'll only pull the calipers off the mounting plates, not remove the plates and spacers.
With calipers off the plates, there should be room to remove the wheel.
Just to point out differing rules, we'd be using opposed piston twin pots - Lockheed or Brembo - and we're not allowed floating discs unless they were OE fitment...Pic attatched, a bit butch, but very effective...
The piece of thick sheet used as a spacer should be duplicated for the other side. If I have it right, when swapping wheels you'll only pull the calipers off the mounting plates, not remove the plates and spacers.
With calipers off the plates, there should be room to remove the wheel.
Just to point out differing rules, we'd be using opposed piston twin pots - Lockheed or Brembo - and we're not allowed floating discs unless they were OE fitment...Pic attatched, a bit butch, but very effective...
Last edited:
P
patrino
Guest
Got a good chunk of work done tonight.
Removed the bodywork for paint, wrapper the headers, disassembled the forks, plus a bunch of misc stuff.
The bits from RaceTech showed up. Anyone run Gold Valves in their front end? There are a number of tuning variables in the damping: valve preload (seven settings), valve spring rate (two options), most importantly. As usual, I'd rather not reinvent the wheel, so if you have experience with them, please let me know.
Ordered some aluminum stock from McMaster-Carr yesterday, so should be able to resume work on the new brake hangers once the front end's back together.
Removed the bodywork for paint, wrapper the headers, disassembled the forks, plus a bunch of misc stuff.
The bits from RaceTech showed up. Anyone run Gold Valves in their front end? There are a number of tuning variables in the damping: valve preload (seven settings), valve spring rate (two options), most importantly. As usual, I'd rather not reinvent the wheel, so if you have experience with them, please let me know.
Ordered some aluminum stock from McMaster-Carr yesterday, so should be able to resume work on the new brake hangers once the front end's back together.
Make sure you follow the instructions fully
In particular: make sure you drill the extra holes in the damping rods ABOVE the bottom out cones.
Also go with the recommended valve spring preload of 3 turns as a starting point.
I left mine at this level in the end
P
patrino
Guest
JohnKat, here's a photo, could you please help me understand what you mean by "above" the bottom out cones?
Also, anyone able to please confirm that I've got the aluminum part oriented correctly relative to the damper rod? My parts diagram all show this direction as correct, but looks like the previous owner installed one of them in the other direction. It's stuck in the slider now, and I'm having a tough time getting it out. I tried heat and penetrating oil. Fashioned a hook-like deal I'm going to try to yank it out, slide-hammer style (need to go to the hardware store tomorrow to get some additional bits.) Sheesh.
Also, anyone able to please confirm that I've got the aluminum part oriented correctly relative to the damper rod? My parts diagram all show this direction as correct, but looks like the previous owner installed one of them in the other direction. It's stuck in the slider now, and I'm having a tough time getting it out. I tried heat and penetrating oil. Fashioned a hook-like deal I'm going to try to yank it out, slide-hammer style (need to go to the hardware store tomorrow to get some additional bits.) Sheesh.
P
patrino
Guest
ah, got it. So the "bottom-out cone" is the part of the damping rod that has been turned down to a smaller diameter?
Looks like at the end of the day I'll have:
1. two pairs of the OEM holes in the bottom-out cone, which I've enlarged to 8mm
2. one pair of holes in the larger-diameter part of the damping rod (I need to add these)
Sound right? I'll have the extra set of holes down in the bottom-out cone, but I don't think those will matter. I'm guessing a couple extra holes won't matter, since the Gold Valve will be what's responsible for compression damping, not the damping rod hole diameter.
Looks like at the end of the day I'll have:
1. two pairs of the OEM holes in the bottom-out cone, which I've enlarged to 8mm
2. one pair of holes in the larger-diameter part of the damping rod (I need to add these)
Sound right? I'll have the extra set of holes down in the bottom-out cone, but I don't think those will matter. I'm guessing a couple extra holes won't matter, since the Gold Valve will be what's responsible for compression damping, not the damping rod hole diameter.
No the bottom out cone is the piece of aluminum that slides on the bottom of the damping rod.
It locks the hydraulics when the fork is fully compressed.
You should test the fork tube without the spring installed to make sure everything slides smoothly.
You are right the enlarged holes will not play a big role now that the extra holes have been drilled above.
The compression damping is now taken over by the Gold Valve.
As I mentionned earlier, start with the recommended spring preload first
P
patrino
Guest
Got everything back together last night, everything moves well.
Thanks for the assist!
Thanks for the assist!
O
overboostin
Guest
What class do you plan on racing in with all the suspension mods? I was looking on ahrma for a qualifying class for my build and I wasn't sure anything qualified with all the suspension mods.
G
Guest
Guest
Vintage Heavyweight superbike , it is in the hand book . Page's 49-51 . Has to run restricted though, meaning the 29mm carbs max . All suspension mods are acceptable. Looks like fun
Last edited:
