Painted Carbs

[Guest]

Oh, it's a spray? I thought it'd be something you'd paint on.

It comes in a rattle can.

 

[UncleMike]

It comes in a rattle can.

Things best left professionals like yourself.

 

[oshanac]

Does anyome know what size bolts and thread pitch is necessary for the VM26's top covers and float bowls?

 

[oshanac]

Can you use Aluminum bolts or are they to weak? Thanks guys

 

[Guest]

Does anyome know what size bolts and thread pitch is necessary for the VM26's top covers and float bowls?

They are M4 x 16mm

 

[Guest]

Can you use Aluminum bolts or are they to weak? Thanks guys

I don't see why not.

 

[rapidray]

Don't mean to get off track here but Bruce, I just had an idea! How about your beast like a Cooley but in Black & White?! Most are done in Blue & White or Red & White but can you picture yours as an "S" in Black & White?!!! Ray.

 

[jwhelan65]

Don't mean to get off track here but Bruce, I just had an idea! How about your beast like a Cooley but in Black & White?! Most are done in Blue & White or Red & White but can you picture yours as an "S" in Black & White?!!! Ray.

Oh man Ray now your on to something...maybe do the wheels white and leave the stock polished alluminum outer rim. A Yoshi decal here or there..
hmmm....woah that would be killer sick!!

 

[salty_monk]

Bugger... stealin my idea for a future project

I agree it would look good

 

[Guest]

Don't mean to get off track here but Bruce, I just had an idea! How about your beast like a Cooley but in Black & White?! Most are done in Blue & White or Red & White but can you picture yours as an "S" in Black & White?!!! Ray.

I have actually thought of doing that. But who knows? Every time I think I have a color scheme and style figured out, I change my mind!

 

[Guest]

Bugger... stealin my idea for a future project

I agree it would look good

Maybe too much black in my case? Black motor, carbs, pipe...AND paint? :-k

 

[salty_monk]

Do it reverse... white with black accents!

 

[jetmech]

Since I just happen to be rebuilding/painting my VM29's this thread came at a perfect time. I had 3 of them dipped, cleaned, and painted but I never heard of boiling them so I tried it on the last one. Holy Crap! I got so much more junk out of it ,now I'm going to start over on the other 3. Thanks for the tip.

 

[reddirtrider]

Since I just happen to be rebuilding/painting my VM29's this thread came at a perfect time. I had 3 of them dipped, cleaned, and painted but I never heard of boiling them so I tried it on the last one. Holy Crap! I got so much more junk out of it ,now I'm going to start over on the other 3. Thanks for the tip.

After boiling are you relubricating the butterfly sleeves by adding a drop or so of oil?

 

[Guest]

After boiling are you relubricating the butterfly sleeves by adding a drop or so of oil?

These are VM carbs....no butterflies. But a good point. Some carbs have areas that need lube after boiling OR dipping.

 

[oshanac]

Thanks for the sizes Renobruce! I don't know if you can torque the aluminum ones down to prevent leaks. I may try to find one and give it a go. I'll do the top cover hole. If it breaks off, it should be easy to "easy-out". Do you remember if they are considered coarse or fine thread? Thank you again. I love this Board!

 

[Guest]

Thanks for the sizes Renobruce! I don't know if you can torque the aluminum ones down to prevent leaks. I may try to find one and give it a go. I'll do the top cover hole. If it breaks off, it should be easy to "easy-out". Do you remember if they are considered coarse or fine thread? Thank you again. I love this Board!

The bolts dont need alot of torque so you should be fine. The thread pitch on the bolts is 0.7

 

[jwhelan65]

The bolts dont need alot of torque so you should be fine. The thread pitch on the bolts is 0.7

Good source for any size metric hardware www.boltdepot.com

I purchased stainless allen socket heads for the carb in-take boots.

.50 each.

 

[Tom MLC]

Back near the beginning of this thread Bruce was showing the VM29's he worked up for me. Red, of course!

I thought some of you might be interested in seeing them on the bike. Here they be!

 

[posplayr]

Great look Tom. Carbs turned out real well. :dancing:

Hey I was just noticing that Fairing; What kind is it? U got a 7" headlamp on there right?

Not a Ducati is it?

Jim