• Required reading for all forum users!!!

    Welcome!
    Register to access the full functionality of the GSResources forum. Until you register and activate your account you will not have full forum access, nor will you be able to post or reply to messages.

    A note to new registrants...
    All new forum registrations must be activated via email before you have full access to the forum.

    A Special Note about Email accounts!
    DO NOT SIGN UP USING hotmail, outlook, gmx, sbcglobal, att, bellsouth or email.com. They delete our forum signup emails.

    A note to old forum members...
    I receive numerous requests from people who can no longer log in because their accounts were deleted. As mentioned in the forum FAQ, user accounts are deleted if you haven't logged in for the past 6 months. If you can't log in, then create a new forum account. If you don't get an error message, then check your email account for an activation message. If you get a message stating that the email address is already in use, then your account still exists so follow the instructions in the forum FAQ for resetting your password.

    Have you forgotten your password or have a new email address? Then read the forum FAQ for details on how to reset it.

    Any email requests for "can't log in anymore" problems or "lost my password" problems will be deleted. Read the forum FAQ and follow the instructions there - that's what we have one for...

  • Returning Visitors

    If you are a returning visitor who never received your confirmation email, then odds are your email provider is blockinig emails from our server. The only thing that can be done to get around this is you will have to try creating another forum account using an email address from another domain.

    If you are a returning visitor to the forum and can't log in using your old forum name and password but used to be able to then chances are your account is deleted. Purges of the databases are done regularly. You will have to create a new forum account and you should be all set.

Solid State Power Box

That is awesome news! I think I was one of the firsts on the list correct? I will make sure and set aside the funds then for next week.

I thought you had mentioned the relay function which is really cool. I'm just using the basic, popular coil relay mod that most everyone is using. So I should remove the relay and put the wiring back to stock when using this correct?

Man this is gonna be so awesome. Thanks again for working on this Posplayr!
 
posplayr said:
So the glass bulb is only 35 mm (1.38") tall correct? So this actually shorter than the SSPB even without the LED protrusion (minimum of 1.56" or 1.63" with LED mounts ). As per your pictures the 78-9 GS1000 fusebox is the abbreviated short (in length) model and so the longer boxes have to move to the left on the mounting plate anyway. So even if the SSPB fit the small fuse box bolt pattern there is not enough room due to the frame. So the only relevant question is how much clearance is there under the cover in the location where you moved the longer blade fuse box.?

I understand that you had to cut 6mm off of the 83 750 blade type boxes cover to avoid interference but it also stuck out more due to the mounting plate. So if you don't mind, what is the total stack height of your plate and modified 83 750 fuse box. That is probably close to the maximum height available under the GS 1000 cover at the location where you moved your blade fuse box.
Click to expand...
As luck would have it I got a stock electrics plate with the wiring loom I can take a pic with both for reference.It will have to wait til tomorrow as we have an engagement to go to soon.Get a total height to.
 
Ready to go whenever you are Jim.... No huge rush either though! Whatever is easiest for you. :)
 


The total height of the modified blade box and mount is 40 mm.It's close but I think your box will just clear.
 
SVSooke said:


The total height of the modified blade box and mount is 40 mm.It's close but I think your box will just clear.
Click to expand...

Thanks,
That is wild how far out that R/R is sticking out; Does the side cover fit over that??? At 40mm that is 1.575" which is slightly less than the SSPB with steel LED mounts at 1.625".

There is probably going to be some frame interference putting in the SSPB in that original location; a tabless design shifted closer to the R/R would probably do similar to your solution.
 
checkout the additional YouTube videos posted at the head of the thread.

http://www.thegsresources.com/_forum/showthread.php?t=210261

Just a reminder. These will be $150 + Shipping for the initial production run with a 3 year limited warranty meaning I will fix or replace the units. The units should be robust but if something breaks and I learn something I will either fix it unless there is a chronic problem I will replace it with the next generation.


So if you want to place an order:
  1. send me an email at SolidStatePowerBox@gmail.com including your GSR handle.
  2. Please specify what heatsink style you want. (Tabless is the smallest and most flexible)
  3. Please specify the bike it is to be installed on.
  4. If you know what R/R let me know
  5. If you have a picture of the mounting location that shows the relation to the R/R , solenoid relay and fuse box this will help will help avoid any potential issues early on with wire length or fit.
 
Last edited:
Happy Thanksgivings everyone.

I have gone back through my records and have either emailed or PM'ed people that had previously confirmed they wanted a SSPB.

If you have not already received an email from me and you want to get in on orders shipped by Dec 10th 2013 then email me at SolidStatePowerBox@gmail.com for more info.
 
So, it occurred to me this morning that on the bike I plan to use this on, I will be deleting the electric starter and related circuit altogether (kick-start only).

Looking over the diagram, it does not appear that this will be an issue, but I WILL be left with this brilliantly-designed, yet unused 'Start Switch' circuit.

Is there anything I'm missing? Will running this unit in a 'kicker only' application present any issues that I'm not seeing? Any ideas for alternative usage of the 'relay mod' switch?
 
Last edited:
Stahlgrau333 said:
So, it occurred to me this morning that on the bike I plan to use this one, I will be deleting the electric starter and related circuit altogether (kick-start only).

Looking over the diagram, it does not appear that this will be an issue, but I WILL be left with this brilliantly-designed, yet unused 'Start Switch' circuit.

Is there anything I'm missing? Will running this unit in a 'kicker only' application present any issues that I'm not seeing? Any ideas for alternative usage of the 'relay mod' switch?
Click to expand...

If you want the headlamp to cut out while cranking you could leave the button connected . This would be in case you don't have a switch to turn on and off the light. Of course you would need to depress it to get the light to cutout while foot cranking.

If you leave the start input disconnected the headlamp will just come on with the ignition switch.

You could do something like detect when you are cranking (I think other bikes put a diode onto the stator AC to get a DC signal and use that to signal the SSBP start input to cutout the headlamp for a fixed delay. You would have to figure out a simple way to so that. I cant add a fixed time delay into the SSPB any easy way; It doesn't have any software inside. :)

Something simple might be an RC time delay driving a FET to create the start signal for a period after you start cranking.
 
Last edited:
posplayr said:
If you want the headlamp to cut out while cranking you could leave the button connected . This would be in case you don't have a switch to turn on and off the light. Of course you would need to depress it to get the light to cutout while foot cranking.

If you leave the start input disconnected the headlamp will just come on with the ignition switch.

You could do something like detect when you are cranking (I think other bikes put a diode onto the stator AC to get a DC signal and use that to signal the SSBP start input to cutout the headlamp for a fixed delay. You would have to figure out a simple way to so that. I cant add a fixed time delay into the SSPB any easy way; It doesn't have any software inside. :)

Something simple might be an RC time delay driving a FET to create the start signal for a period after you start cranking.
Click to expand...

I'm glad to see that my thinking was in line with yours.

I don't believe the '79 came with a HL On/Off switch, so I was thinking that when I build the new harness I could tie all of the lights (except t/s) into a single manual switch on that circuit, using it in place of the 'Start' switch, but in reverse. Essentially, it would be an additional 'accessory' circuit in my application.
 
The '79s had the switch, but it won't work until you modify it. They added a little tit to the back of the knob to block the switch from moving. Cut it off and the switch functions normally.

I just did this last week to my new '79 GS550.
 
Stahlgrau333 said:
I'm glad to see that my thinking was in line with yours.

I don't believe the '79 came with a HL On/Off switch, so I was thinking that when I build the new harness I could tie all of the lights (except t/s) into a single manual switch on that circuit, using it in place of the 'Start' switch, but in reverse. Essentially, it would be an additional 'accessory' circuit in my application.
Click to expand...

You don't want to put all the lights on a single circuit. Each is limited to 10 amps max and they are typically only 5 amps. Blinker/Brakes is 5-7 amps and Headlamp is 5 amps with peaks to 9. If you do LED's this would be different and combining some with headlamp might work.

Another alternative is that I "red wire" gang (special for you before I pot the PCB) the ACC and HEADLAMP channels so they both act in unison (as the HEADLAMP circuit currently does alone) and dim when the start is active. That would give you two 10 amp circuits to cut out while cranking.
 
posplayr said:
You don't want to put all the lights on a single circuit. Each is limited to 10 amps max and they are typically only 5 amps. Blinker/Brakes is 5-7 amps and Headlamp is 5 amps with peaks to 9. If you do LED's this would be different and combining some with headlamp might work.

Another alternative is that I "red wire" gang (special for you before I pot the PCB) the ACC and HEADLAMP channels so they both act in unison (as the HEADLAMP circuit currently does alone) and dim when the start is active. That would give you two 10 amp circuits to cut out while cranking.
Click to expand...

Good points. I think leaving the headlamp on it's own separately-switched circuit is the best route to go. That would also allow me to play with things like HIDs or LED T/S and marker lights on their own circuits.

I wouldn't want to have you customize anything, as I want to be able to give accurate feedback on the design, and also because I may use the box on multiple bikes.

I think a manual switch in place of the 'Start' button - possibly even wiring the OEM On/Off switch in it's place - will work best.
 
tkent02 said:
The '79s had the switch, but it won't work until you modify it. They added a little tit to the back of the knob to block the switch from moving. Cut it off and the switch functions normally.

I just did this last week to my new '79 GS550.
Click to expand...

I went out and looked, and sure enough, there's an On/Off switch there and it does work.

Looked again, and the 550 I'm working on is actually a '78, not a '79. Whoops. :oops:
 
Has anyone received their solid state and installed it yet? Just curious about how the installs are going and how everything is working.
 
Roland5color said:
Has anyone received their solid state and installed it yet? Just curious about how the installs are going and how everything is working.
Click to expand...

There was an PCB issue with the Rev A PCBs that were delivered back in August. It was only after assembling 20 boards did I find it out. The new Rev B boards arrived on Friday and I'm in the processes of assembling those but just discovered a major problem. I' going to go to a new vendor in the morning.
 
Last edited:
Unfortunately there have been repeated defect rework cycles with Silver Circuits the PCB's manufacturer. :(:mad::confused:

http://www.custompcb.com/

So I have just ordered new PCBs' from Advanced Circuits a very good is not THE best quick turn PCB fab house around. Having gone through two revs already with Silver Circuits I feel confident in stepping up to a relatively large order for the Rev C boards.

http://www.4pcb.com/

Solid State Power Boxes should be available again by the end of January 2014 after the 10 units are delivered for existing orders.

Thanks for your patience and have a happy and safe New Years :dancing:
 
Last edited:
Happy New Year, Jim, sorry you have been put through the wringer by "custom" pcb.

I remain patient, no hurry for mine. (I'm sure the desert dwellers are getting anxious).
 
Last edited:
You must log in or register to reply here.

Similar threads

S
Relay upgrades for '79 GS850G
2
Replies
24
Views
452
salty_monk
salty_monk
crazyramen
Ground Loops, Mystery Fuse, and Bad Crimpers
Replies
3
Views
106
crazyramen
crazyramen
S
SH775 wire harness guidance
Replies
5
Views
190
bren
bren
jon
Turn signals inop. They have voltage to both sides?
Replies
19
Views
285
jon
jon
argonsagas
Surgican incision?.No. Surgical insect
Replies
7
Views
144
LAB3
LAB3
Back
Top