.png "Powered by vBulletin")
SUB..scribed!! 
-
Rob
1983 1100ES, 98' ST1100, 02' DR-Z400E and a few other 'bits and pieces'
Are you on the GSR Google Earth Map yet? http://www.thegsresources.com/_forum...d.php?t=170533 -
Subcribed too! Should be fun to watch. Hope it doesn't give me any crazy ideas.
No signature :(Comment
-
Hooyah and booyah
Subscribed
Can't wait to see how this turns out.Comment
-
Comment
-
Looking good
I went down this path with a GS 1000 S but I'm still fighting to get the front suspension to work correctly.
I bought some RaceTech gold valves to try to improve the front end but I'm not yet quite satisfied with the results.
Eager to get your impressions ( specially with the added horsepower)
Here's a picture:
I'll fix the paint later...
sigpicJohn Kat
My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020Comment
-
What bars you using there John?
I've got some single bolt rubber sprung bar mounts for the top triple left over, yours cheap, if you go that route El G.
1980 GS1000G - Sold
1978 GS1000E - Finished!
1980 GS550E - Fixed & given to a friend
1983 GS750ES Special - Sold
2009 KLR 650 - Sold - gone to TX!
1982 GS1100G - Rebuilt and finished. - Sold
2009 TE610 - Dual Sporting around dreaming of Dakar..... - FOR SALE!
www.parasiticsanalytics.com
TWINPOT BRAKE UPGRADE LINKY: http://www.thegsresources.com/_forum...e-on-78-Skunk/Comment
-
Originally posted by El Giablo View Post
Man, I love those lines. I think a fairing would really set it off
Comment
-
Nah, leave it naked!
Rear wheel just slipped into the 1100 swingarm?Comment
-
-
Verrrrry nice.Comment
-
Thanks, I am going to run the clip-ons.Originally posted by salty_monk View PostWhat bars you using there John?
I've got some single bolt rubber sprung bar mounts for the top triple left over, yours cheap, if you go that route El G.
GordonComment
-
I'm using the ABM conversion kitOriginally posted by salty_monk View PostWhat bars you using there John?
sigpicJohn Kat
My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020Comment
-
Really cool. No fairing and what color bodywork?
How much headache to get that bolted in? Mounts close?1983 GS1100EComment
-
GSXR750 front fender.
El GComment
-
Looks really slick.Comment
Comment